ADM-201 dump PMP dumps pdf SSCP exam materials CBAP exam sample questions

怎样将正方形分成三等份 – 译学馆
未登录,请登录后再发表信息
最新评论 (0)
播放视频

怎样将正方形分成三等份

How to Divide a Square into Thirds

Hey guys, this is Evan from EZ Origami!
大家好 我是《折纸教程》的伊万
And in this video I’ll be teaching you
我将在本视频中教大家
how to divide a square sheet of paper into thirds.
如何把一张正方形的纸分成三等份
All you need to do is prepare a sheet of paper with the same dimensions on both sides.
你只需要准备一张四边等长的纸
And once you’ve prepared your paper,
把纸准备好后
then we’re going to start by folding in half diagonally.
先沿一条对角线对折
So take this bottom right corner and fold it up to the top left corner.
将右下角提起 与左上角重叠
Align the corners and the edges,
角和边都要对齐
then make your crease,
压出折痕
and then unfold.
再恢复原样
Now we’re going to align this bottom edge with the diagonal crease that we just made.
接着 要把底边和刚刚折出的对角线对齐
So we’re going to do that by lifting up the bottom edge,
我们先拉起底边
then we want to start at this bottom left corner and work our way up and over to the right
然后从左下角开始一路向右上方折
until this entire colored edge is aligned with that crease,
直到带色的底边完全跟折痕重叠
just like this.
就像这样
Then you can make your crease.
再次压出折痕
And then you can unfold.
然后展开
Then we’re going to rotate the paper
接着转动纸张
So that the two creases we just made now extend from this top right corner.
使两条折痕的交汇于右上角
And now we’re going to align this right edge with this crease that we just made.
现在我们要把右边线与刚折的这条折痕对齐
So we’re going to do that by pulling this right edge over to the left,
先把右边线往左拉
then we want to start at the top right corner and work our way down
再从右上角开始一路向左下方折
until the entire colored edge is aligned with that crease,
直到整个带色的边线与折痕重叠
just like this
就像这样
And once everything is aligned, then you can make your crease.
完全重叠后 压出折痕
And then you can unfold.
再次打开
And now I want you to notice this point here
现在请注意这个点
where the crease that we just made intersects with this bottom edge.
刚做出的折痕与底边在这点相交
And what we want to do is make a vertical crease extending upwards from that point.
我们要经过这点折一条垂直的折痕
So we’re going to do that by taking this left edge,
先捏住左边
and we’re going to carefully pull it over to the right like this.
像这样小心地向右拉
And you slowly want to pull it over to the right
要慢慢向右拉
until you notice that small crease intersecting with the bottom edge here.
直到你看见这条折痕与底边相交于这点
Once you’ve reached that point,
到达这一点后
then you also want to make sure that the horizontal edges on the top
你还要确保顶端的边线必须完全重合
and the bottom of the model are aligned as well.
底端边线也必须完全重合
Then you can make your crease
然后就可以压折痕了
and then you can unfold.
接着再打开
And then we’re going to fold over the right side of the paper
现在我们要把右边线
and align it with the vertical crease that we just made.
与我们刚折出的垂直折痕重合
So we’re gonna do that by pulling over this right edge,
我们先将右边拉起
and we’re going to align it with that vertical crease.
再把它和垂直折痕重叠
Once the entire edge is aligned, then you can make your crease.
完全重合后 再压出折痕
And then you can unfold.
重新打开
And now you’ve divided your square into thirds.
这样正方形就被分成三等份了
And if you’d like to divide a square into thirds
若你想既把正方形分成三等份
without all these additional creases,
又不用显示这些多余线条
then that’s pretty easy to do too.
也很容易
So what we’re going to do is use this square as a folding tool,
我们可以把这张正方形当做工具纸
and you’ll just need to prepare another square of the exact same size.
再准备一张大小完全一样的纸
So from here we’re just going to fold over the left side of the model along this left-most vertical crease.
先把工具纸沿着最左边的垂直折痕折好
we’re just going to fold the left edge over to the right, just like this.
就像这样把左边线向右折
Then from here we’re going to take another square of the same exact size
接着再拿出那张相同大小的纸
And we basically want to slide it in between the two layers of the folding tool
把它插入工具纸折好的两层之间
by pushing it over to the left as far as it’ll go.
直到无法前进为止
And once the left side of the square aligns with the left edge of the folding tool,
一旦新纸的左边线与工具纸的折痕重合
then your model should look like this.
整个纸形看起来应该是这样的
Then what we want to do is take the right edge on the second square
然后我们要把新纸的右边线
and align it with this vertical edge on the folding tool.
和工具纸的这条垂直边重合
So we’re just going to fold it over like this until both edges are aligned.
就像这样折起来直到两条垂直边重合
Then you can make your crease.
再压出折痕
Then you can slide your square outside of the folding tool and you can put the folding tool aside.
接着把新纸拉出来 工具纸可以收起来了
Then we’re going to unfold this flap that we just folded in
把刚刚折好的纸展开
and then we want to align the left edge with the vertical crease that we just made.
现在要让左边线与刚折出的垂直折痕重叠
So we’re going to do that by pulling this left edge over to the right.
提起左边线向右拉
And once the edge is completely aligned with that vertical crease,
直到与垂直折痕完全重合
you can make your crease.
再压出折痕
Then you can unfold that,
然后打开
and now you’ve divided your square into thirds
现在你的正方形已被分成三等份
without any additional creases.
且完全没有多余的折痕
I hope you’ve enjoyed this video tutorial
希望你喜欢这期教学视频
on how to divide a square sheet of paper into thirds.
教你如何将正方形分成三等份
There are plenty of origami designs that start off this way,
我们还有很多类似的折纸教程
so feel free to check out my video tutorials for those designs here.
您可随时浏览这些视频教程
And if you found this video helpful,
如果觉得本视频有用
please give it a thumbs up or leave a comment below.
请点赞或留言
I’d love to hear what you think!
我期待看到你们的评论
And of course, subscribe to my channel
当然 也请订阅我的频道
and hit the notifications bell for more videos like this.
并点击通知提醒
Thank you for watching
谢谢观看
and I’ll see you in the next video.
期待与您在下期中见

发表评论

译制信息
视频概述

介绍了把正方形纸分成三等份的折纸方法

听录译者

收集自网络

翻译译者

槛外观云

审核员

审核员Y

视频来源

https://www.youtube.com/watch?v=yjjRtkZkU24

相关推荐